Lab

Circuit Challenge: Turn On a Lamp with a Relay

A 12 V switch drives a relay coil, and the relay contacts switch a 12 V lamp. The lamp is wired to the wrong contact, so it is on while the switch is off.…

Preview of Circuit Challenge: Turn On a Lamp with a Relay
Open in the lab Embed Run the circuit right here. To edit it in the full lab, sign in; free accounts have a time limit there.

Electric circuit games

Teaching with circuits?

Create a classroom, give your students a circuit to build, and review what they submit. Try it free with one classroom and up to 5 students.

Try the free classroom demo

How it works

A relay is a switch worked by a coil: a small current in the coil, about 150 mA here, pulls the contacts over and switches a bigger current, the lamp's 500 mA.

The lamp is wired to the resting contact, the left of the three contact pins, so it is on while the switch is off. Move that wire to the right-hand contact. Then the lamp stays dark until you close the switch, and lights as the relay pulls in.

What's inside

  • 1× Battery
  • 1× Switch
  • 1× Relay
  • 1× Lamp

Tags

About

By Samir Sabri
Saved November 20, 2026
35 views
Page: dcaclab.com/circuits/88047-circuit-challenge-turn-on-a-lamp-with-a-relay

Embed this circuit

<iframe src="https://dcaclab.com/experiments/88047-circuit-challenge-turn-on-a-lamp-with-a-relay/iframe" width="560" height="410" frameborder="0"></iframe>

Cite: Sabri, S. (2026). Circuit Challenge: Turn On a Lamp with a Relay. DCACLab. https://dcaclab.com/circuits/88047-circuit-challenge-turn-on-a-lamp-with-a-relay

Related circuits