Lab

1 double throw switch to control 4 relays and corresponding outputs

An interactive resistor, relay, lamp and battery circuit built in the DCACLab online simulator by Tim Grey. Open it to run the simulation and measure it.

Preview of 1 double throw switch to control 4 relays and corresponding outputs
Open in the lab Embed The simulation runs as a demo that pauses after two minutes; open it in the lab to keep going.

What's inside

  • 2× Battery
  • 3× Resistor (2.98 Ω, 4.95 Ω, 4.98 Ω)
  • 1× Switch
  • 4× Relay
  • 4× Lamp

Tags

Battery Switch Relay Lamp Resistor

About

By Tim Grey
Saved December 09, 2017 · updated January 15, 2026
2,380 views
Page: dcaclab.com/circuits/11703-1-double-throw-switch-to-control-4-relays-and-corresponding-outputs

Embed this circuit

<iframe src="https://dcaclab.com/experiments/11703-1-double-throw-switch-to-control-4-relays-and-corresponding-outputs/iframe" width="560" height="410" frameborder="0"></iframe>

Cite: Grey, T. (2017). 1 double throw switch to control 4 relays and corresponding outputs. DCACLab. https://dcaclab.com/circuits/11703-1-double-throw-switch-to-control-4-relays-and-corresponding-outputs

Related circuits